SIZE GUIDE
BRACELETS
- Use a soft measuring tape or a piece of string. Wrap it around the widest part of your wrist, usually at the joint
- Measure the length and record the measurement (cm)
- Add +1 cm for a snug fit; add +2 cm for a relaxed fit
Example: Measured wrist = 16 cm → choose 17 cm for snug, 18 cm for relaxed
RINGS
Method 1: Measure an existing ring
- Place a ring that fits you comfortably on a flat surface
- Measure the inner diameter* and record the measurement (mm)
* Distance across the inside of the ring, from one inner edge to the other, at the widest point
Example: Measured existing ring = 17 mm → check product page for adjustable info and default inner diameter
Method 2: Measuring your finger
- Use a soft measuring tape or a piece of string. Wrap it around the base of your finger
- Measure the circumference and record the measurement (mm)
- Use the Size Chart below to find the corresponding inner diameter
Example: Measured finger circumference = 57 mm → inner diameter ≈ 18.1 mm → check product page for adjustable info and default inner diameter
All Everwood Studio ring measurements are based on inner diameter (mm).
Most rings are adjustable. The listed dimensions on the product page show the default inner diameter prior to adjustment, and minor variations are normal. To adjust, apply gentle and even pressure to the band. Avoid frequent or forceful reshaping, as this can fatigue the metal over time.
Ring size chart adapted from the Gemological Institute of America (GIA). Used for general reference purposes.